Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1 Date: 23/11/2022 Author: ERC Page 807 of 834 Copyright by TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout our consent P0048-00: Turbocharger/Supercharger Boost Control "A" Circuit High Overview: Code Cause Effect on Vehicle Fault Code: P0048-00 1. VGT sensor short circuit to supply – Positive Terminal 2. ECU terminal pin damage or bend 3. ECU connector pin backout 1. MIL Lamp ON 2. Reduced vehicle performance 3. Disabled drive mode option Lamp status: Check Engine Lamp off Malfunction Indicator Lamp on Checkpoint: Check Battery Voltage at Ignition off (Nominal Range 11.5V ~ 12.8V) Trouble Shooting Steps: Sr. No. Steps Specifications Step 1 Check connector is connected properly. Remove and connect again properly - Step 2 Check the ECU terminal pin for any damage or bend. Check the ECU connector for any pin backout - Step 3 Check the continuity between VGT connector pin 1 and ECU connector pin A71. If there is any discontinuity, correct it - Step 4 Check for any physical damage in VGT actuator or connector - Step 5 If problem persists, replace the Turbo charger - Verification condition: Drive the vehicle in city and highway condition. Circuit Schematic Diagram:
RkJQdWJsaXNoZXIy MTIwNTUz