NEXON NEW MCE-2 DCT BS VI DTC Troubleshooting Guide Version: 1.0 Date: 16-06-2023 Author: Akash/Rahul Page:233 of 645 Copyright ©TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. 3 Check and save freezeframe data. Clear the DTC and check if the DTC does not come back Go to step 4 4 Replace the TCU if the problem persists & flash the adaption data from the previous TCU. Clear the DTC and check if the DTC does not come back DTC’s confirmation:- After rectification, clear all DTC’s and ensure the following points by referring TCU parameters using TML diagnostic tool before handing over to customer. • Drive the vehicle through all gears in both Automatic and Manual modes. • Ensure no DTC is active and Transmission Fault Lamp is OFF. Circuit Schematic Diagram: Component Location & Image:-
RkJQdWJsaXNoZXIy MTIwNTUz