NEXON NEW MCE-2 DCT BS VI DTC Troubleshooting Guide Version: 1.0 Date: 16-06-2023 Author: Akash/Rahul Page:637 of 645 Copyright ©TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. 103 P2722-98 Pressure control solenoid 5 (EDS 5): over temperature Transmission Fault Lamp ON 1. Transmission wiring loom for any damage. 2. Hydraulic unit & transmission oil. 3. TCU. 104 P2727-64 Clutch actuation line pressure adaption failure Transmission Fault Lamp ON 1. HCU. 2. TCU. 105 P2728-92 Line Pressure Control Solenoid Current below stable threshold Transmission Fault Lamp ON TCU 106 P2787-00 Clutch 01 temperature too high Transmission Fault Lamp ON 1. Transmission sump temperature value. 2. Oil sump temperature sensor resistance over connector pins. 3. Coolant level in the vehicle. 4. Coolant is contaminated with external fluid. 5. Engine coolant pump for any damage. 6. Oil level & perform oil levelling procedure. 7. Transmission oil cooler connections are proper. 8. Transmission oil cooler is damaged or clogged by external substances. 107 P27F3-4B Clutch 02 temperature too high Transmission Fault Lamp ON 1. Transmission sump temperature value. 2. Oil sump temperature sensor resistance over connector pins. 3. Coolant level in the vehicle. 4. Coolant is contaminated with external fluid. 5. Engine coolant pump for any damage. 6. Oil level & perform oil levelling procedure. 7. Transmission oil cooler connections are proper. 8. Transmission oil cooler is damaged or clogged by external substances. 108 P3002-00 Invalid production data Transmission Fault Lamp ON TCU 109 P3009-4A Angle sensor configuration: ID mismatch 1.Transmission lamp ON 2.All gear enable but vehicle not able to drive 3.Creep disable. 1. TCU. 2. Angle sensor.
RkJQdWJsaXNoZXIy MTIwNTUz