Vehicle Platform: NEXON, X4, Q5, TIGOR_MCE ECU Name: PEPS DTC Troubleshooting Data Version: 1.8 Date: 28 Feb 2023 Author: Rajasekhara Reddy Page: 9 of 407 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting:- Yes Voltage fluctuate s between 0V and V? 14 A Disconnect PEPS ECU power supply connector . Check voltage b/w pin 9 & 10. ) Refer Connector View & Information ( No Yes Is DTC Present? No Stop . Connect the TML Diagnostic Tool 1 . 2 . Turn the Ignition ON . Check the status 3 of DTC’s (Memorized/Current) . Record the DTC & Clear 4 . Turn Ignition OFF & ON 5 . 6. Read ECU parameters 7001 (Control Module Input Power “A”) using diagnostic tool Range: 9 to 16 V. 7 . Verify If DTC U3006 – 16 is present Replace wiring harness ( Vehicle side) Check resistance between vehicle ground and ground at the power supply connector. Resistance 1 Ω? < No Yes
RkJQdWJsaXNoZXIy MTIwNTUz