Nexon MCE 2 Gen3 Digital Instrument Cluster DTC Troubleshooting Data Version: 1.0 Date: 12-June-23 Author: Vasant Date Page: 31 of 135 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting:- Turn ON Ignition. Connect the TML Diagnostic Tool. Check the status of DTC’s (Memorized/Current) Record the DTC & Clear DTC’s Turn Ignition OFF & ON Verify If DTC B194A -11 is present. Is DTC B194A-11 is Present? Check for the DIC switch functionality. Intermittent Problem Exist Refer the intermittent problem inspection procedure. Is DIC switch Short to GND? stucked? DIC Switch /Paddle shifter is shorted to GND. Rectify fault at wiring Harness to recover the fault. Clear the DTC & verify the function of DIC switch. Clear the DTC from the ECU memory. Turn Ignition OFF & ON check the function of DIC switch. Stop YES NO YES NO
RkJQdWJsaXNoZXIy MTIwNTUz