Gravitas FATC Gen 3 DTC Troubleshooting Data Version: 1.0 Date: 15-July-2023 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 190 of 301 Healing Condition 1) Connect the sensor connector firmly 2) If the values seen on the diagnostics tool in read ECU parameters is not getting updated then replace the sensor 3) If there is no continuity between the sensor connector & ECU connector then correct the wiring harness 4) If there is a continuity between the sensor signal and battery lines correct the wiring harness (wiring harness short to battery)1) Connect the sensor connector firmly 2) If the values seen on the diagnostics tool in read ECU parameters is not getting updated then replace the sensor 3) If there is no continuity between the sensor connector & ECU connector then correct the wiring harness 4) If there is a continuity between the sensor signal and battery lines correct the wiring harness (wiring harness short to battery)1) Connect the sensor connector firmly 2) If the values seen on the diagnostics tool in read ECU parameters is not getting updated then replace the sensor 3) If there is no continuity between the sensor connector & ECU connector then correct the wiring harness 4) If there is a continuity between the sensor signal and battery lines correct the wiring harness (wiring harness short to battery)1) Connect the sensor connector firmly 2) If the values seen on the diagnostics tool in read ECU parameters is not getting updated then replace the sensor 3) If there is no continuity between the sensor connector & ECU connector then correct the wiring harness 4) If there is a continuity between the sensor signal and battery lines correct the wiring harness (wiring harness short to battery)1) Connect the sensor connector firmly 2) If the values seen on the diagnostics tool in read ECU parameters is not getting updated then replace the sensor 3) If there is no continuity between the sensor connector & ECU connector then correct the wiring harness 4) If there is a continuity between the sensor signal and battery lines correct the wiring harness (wiring harness short to battery)1) Connect the sensor connector firmly 2) If the values seen on the diagnostics tool in read ECU parameters is not getting updated then replace the sensor 3) If there is no continuity between the sensor connector & ECU connector then correct the wiring harness 4) If there is a continuity between the sensor signal and battery lines correct the wiring harness (wiring harness short to battery)1) Connect the sensor connector firmly 2) If the values seen on the diagnostics tool in read ECU parameters is not getting updated then replace the sensor 3) If there is no continuity between the sensor connector & ECU connector then correct the wiring harness 4) If there is a continuity between the sensor signal and battery lines correct the wiring harness (wiring harness short to battery)1) Connect the sensor connector firmly
RkJQdWJsaXNoZXIy MTIwNTUz