Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. PSCM DTC Troubleshooting Guide for Mando EPAS Version: 1.1 Date: 14/01/2019 Author: E&E Chassis - ERC Page16 DTC’s confirmation: After rectification, ensure the following points before handing over the system to the customer 1. Replacement of Steering column as per annex_1. 2. Drive the vehicle on road and check the assistance. Circuit Schematic Diagram: Troubleshooting: : YE S 1 . Connect the TML Diagnostic Tool . 2 . Turn the Ignition ON ) 3 . Check the status of DTC’s (Memorized/Current 4 . Record the DTC & Clear 5 . Turn Ignition OFF & ON 6 . Read ECU parameters 6204 ( Steering Torque Applied ) using diagnostic tool 7 . Reset the ECU (remove the power plug from ECU and reconnect after min 5 ) 8. Verify If DTC C1314-01 is present Is DTC Present? No Stop Replace the steering column
RkJQdWJsaXNoZXIy MTIwNTUz