Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. PSCM DTC Troubleshooting Guide for Mando EPAS Version: 1.1 Date: 14/01/2019 Author: E&E Chassis - ERC Page77 DTC’s confirmation: After rectification, ensure the following points before handing over the system to the customer 1. Replacement of ECU as per annex_1. 2. Drive the vehicle on road and check the assistance. Circuit Schematic Diagram: NA 1. Connect TML Diagnostic tool 2. Turn IGN ON 3. Check DTC status (Memorized/Current) 4. Record DTC & clear 5. Turn IGN OFF & ON 6. Read ECU parameters 7000 (Control Module Internal Temp) using diagnostic tool Temp Range : -48°C to 158°C 7. Verify if U1006-4B is present
RkJQdWJsaXNoZXIy MTIwNTUz