ERC, Chassis Engineering Prepared by : Sagar K Approved by: Bhavesh Raut Page | 73 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Nexon MCE ESP DTC Troubleshooting data Document no: X01ME111219 Date: 11-Dec-19 Trouble Shooting: DTC’s healing confirmation: If the ABS/ESP/HDC/HHC lamp on Instrument Cluster goes OFF, DTC is healed. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Component/Connector Location & Image: N.A. Connector View & Information: Please refer to Annex 2 . Inspection Method: N.A. START 1. CLEAR DTC 2. TURN IGNITION OFF & ON. 3. WAIT FOR 5 SEC WRITE VALID VARIANT MATCHING TO ACTUAL VEHICLE CONFIGURATION USING DIAGNOSTIC SERVICE 1. CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITIONON. 3. CHECK THE STATUS OF DTC’s (MEMORIZED/CURRENT) 4. RECORD THE DTC AND CLEAR. 5. TURN IGNITION OFF & ON. 6. VERIFY IF DTC C1604-56 IS PRESENT
RkJQdWJsaXNoZXIy MTIwNTUz