TPMS Part Replacement Procedure- NEXON MCE Title: TPMS System Part Replacement Procedure(NEXON MCE) Date: 18-Mar-20 Version 3.0 Page: 11 of 19 Prepared:Kapil M Checked: Awanish T Approved: Sanjeev M This specification is the exclusive property of Tata Motors Limited. Without their consent it may not be reproduced or given to third parties. The above specifications are subject to change and therefore suppliers are requested to refer the latest one. CONTROLLED COPY FOR RESTRICTED CIRCULATION © TATA MOTORS LTD. Figure 2: Sensor ID Display on Sensor 2. Once all Sensor IDs are known, Operator can write above DID in ECU using Diagnostic tools. (DID 64XX). 3. To Write DID See Figure 1 above. b) TPMS Learning by Routine: (IF faulty ECU’s CAN is not working) For learning process please follow below steps. 1. Fill Air pressure in all tires to 40 psi. 2. Connect TDS Tool to Vehicles OBD Connector. 3. Open TDS executable select appropriate vehicle variant. 4. Select TPMS ECU and press start button. 5. Select Routine Test from list. Figure 3: TDS Options 6. Execute the TPMS routine 4A01 in order to enter in manual learning mode. 7. There will be 6 options present as below Routine Test Button
RkJQdWJsaXNoZXIy MTIwNTUz