X104 CNG (Nexon) 4” Instrument Cluster DTC Troubleshooting Data Version: 2.0 Date: 19-August-24 Author: Suraj Shivsharan Page: 136 of 160 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. DTC’s confirmation:- After rectification, ensure the following points using TML diagnostic tool before handing over to customer. a) Check whether TPMS ECU is communicating with diagnostic Tool or not. b) DTC should not be present in ECU memory. Circuit Schematic Diagram:- N.A TPMS ECU side Connector:- Component Location & Image:- N.A Connector Location:- N.A TPMS ECU Pin assignment:- CHAMBER A Pin No. Pin Name Description 6 CAN_H CAN High 5 CAN_L CAN Low 7 GND Voltage Battery GND 3 IGNITION SWITCH Ignition Switch 1 Battery (+Ve) Voltage Battery Power
RkJQdWJsaXNoZXIy MTIwNTUz