Nexon_MCE2_7inch_Digital Instrument Cluster_DTC Trouble Shooting Data Version: 1.0 Date: 09-May-2023 Author: Suraj Patil / Rajesh Patil Page: 20 of 167 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. DTC’s confirmation: - After rectification, ensure the following points before handing over the system to the customer a) Battery voltage should be 9-16v. b) Ensure ECU connector is place correctly. c) In the absence of OAT sensor IC shall display ‘---‘deg. C. d) Check and ensure OAT Sensor input & follows the same Deg. C value on Display. e) Check also in vehicle driving condition & check the temperature change on display. Circuit Schematic Diagram: - Component Location & Image: - OAT Location: -
RkJQdWJsaXNoZXIy MTIwNTUz