Nexon_MCE2_7inch_Digital Instrument Cluster_DTC Trouble Shooting Data Version: 1.0 Date: 09-May-2023 Author: Suraj Patil / Rajesh Patil Page: 63 of 167 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting: - Turn ON Ignition. Connect the TML Diagnostic Tool. Check the status of DTC’s (Memorized/Current) Record the DTC & Clear DTC’s Turn Ignition OFF & ON Verify If DTC B1936 -56 is present Is DTC B1936-56 is Present? Check for continuity of CAN lines between IPC & VICM. Check VICM power supply & working properly. Is problem with VICM? CAN communication or VICM ECU is not working properly. Rectify Fault at wiring Harness to recover the fault. Clear the DTC & verify the function of Odometer on display by running the vehicle. Clear the DTC from the ECU memory. Turn Ignition OFF & ON. Check whether same DTC is coming again or not. Stop Stop YES NO YES NO Stop
RkJQdWJsaXNoZXIy MTIwNTUz