Nexon_MCE2_7inch_Digital Instrument Cluster_DTC Trouble Shooting Data Version: 1.0 Date: 09-May-2023 Author: Suraj Patil / Rajesh Patil Page: 100 of 167 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. DTC’s confirmation: - After rectification, ensure the following points using TML diagnostic tool before handing over to customer. a) Check whether TCM ECU is communicating with diagnostic Tool or not. b) DTC should not be present in ECU memory. Circuit Schematic Diagram: - N.A Component Location & Image: - N.A Connector Location: - N.A Connector View & Information: - N.A Inspection Method: - N.A TCM ECU Pin assignment Vehicle Connector-1 Pin No. Pin Name Description 45 CAN_H CAN High 33 CAN_L CAN Low 28 Ign Ignition 27 Vbat Supply Voltage Battery 1,2 GND Battery GND Connector View & Information: - IPC ECU side connector diagram
RkJQdWJsaXNoZXIy MTIwNTUz