Nexon_MCE2_7inch_Digital Instrument Cluster_DTC Trouble Shooting Data Version: 1.0 Date: 09-May-2023 Author: Suraj Patil / Rajesh Patil Page: 152 of 167 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting: - Clear the DTC from the ECU memory. Turn Ignition OFF & ON. NO NO Wireless charger input is short to ground. Rectify Fault at wiring Harness & wait for 20 sec to recover the fault. Clear the DTC Turn Ignition OFF & ON. Check for continuity betweenPin No.J1-4 (Gnd) & J1-10 (P/R/N/D output) of ECU side. Turn ON Ignition. Connect the TML Diagnostic Tool. Check the status of DTC’s (Memorized/Current) Record the DTC & Clear DTC’s Turn Ignition OFF & ON Verify If DTC B194F -13 is present Wireless charger input is short to ground. Rectify Fault at wiring Harness & wait for 20 sec to recover the fault. Clear the DTC Turn Ignition OFF & ON. Stop YES Is Continuity Present? Is DTC B194F-13 is Present? YES
RkJQdWJsaXNoZXIy MTIwNTUz