Not allowed to carry the IPB at the input rod. • Not allowed to carry the IPB at the ECU cover. • IPB shall not be handled at the motor only, 2nd • hand recommended for stability. Handling of the IPB - Allowed 2nd hand stability • contact areas (green). Care prior and during vehicle assembly: surrounding environment All the components of the braking system in which the brake fluid circulates, have to remain sealed until the moment of their connection to the other components this is to take care of internal cleanliness and to avoid accidental pollution. The brake circuit must use only DOT4 brake fluid as specified in the TATA service manual. Neither greases nor lubricants, nor chemicals, shall be applied to any area of the actuation assembly. The actuation assembly must be protected against touching of other components in the engine bay which could damage or deteriorate the functioning of the surface finish or coating, if applicable. The use of volatile grease and/or oil remover products is forbidden in the working area of the actuation assembly. BRAKES 28
RkJQdWJsaXNoZXIy MTIwNTUz