BRAKE PEDAL ASSEMBLY REMOVAL 14. 1. Remove R-pin from the clevis pin. 2. Remove clevis pin to separate booster assembly from pedal. 3. Loosen and remove the brake mounting M8 fasteners from panel firewall RHD. 4. Remove brake pedal assembly. INSTALLATION 1. Hold the brake mounting bracket on firewall. 2. Tighten the brake upper mounting M8 bolt. 3. Tighten the brake mounting M8 nuts on panel firewall RHD. 4. Match clevis hole to the pedal lever hole and insert clevis pin into the hole. 5. Insert R-pin in to the hole of clevis pin. NOTE Not to add carpet over the basic carpet in the pedal region. Basic carpet should be held firmly in the pedal region. BRAKES 39
RkJQdWJsaXNoZXIy MTIwNTUz