SNAP TYPE BRAKE LIGHT SWITCH 15. INSTALLATION PROCEDURE 1. Adjuster (B) to be snapped on Brake light switch mounting bracket. 2. There should not be play in the adjuster after fitment with mounting bracket. 3. Insert the switch (A) in adjuster (B) till the switch plunger get completely Pressed against brake pedal (at this point switch body will rest on brake pedal) 4. Rotate the switch in direction ‘C until its lock. 5. After locking, the switch will set back by 1±0.15mm. BRAKES 40
RkJQdWJsaXNoZXIy MTIwNTUz