STE P ACTION START BUTTON DOOR & SIDE WINDOWS CONDITION 5 Teaching (Learning of sliding load): This step shall be pushing the Close switch side again within 4 sec after completing Quick one action. - Hold on this Close switch till finish learning of sliding load. - GPA(Glass Panel Assy) & ROLL BLIND ASM shall move automatically as below during teaching. ROLL BLIND ASM Close position →ROLL BLIND ASM Open position →GPA Close position →GPA TILT POSITION →GPA OPEN POISIOTN →GPA CLOSE POSITION →ROLL BLIND ASM Close position (finish). -After visually checking for Close position (finish) as above is certainly achieved then Release the hand from the Close switch. < Caution > If it is no automatic action of GPA (Glass Panel Assy) & ROLL BLIND ASM over 5 sec, the teaching has been failed. During teaching process anti pinch function is disabled Start again from Beginning of Step 3. ON Close 6 Ignition “OFF” and getting out of the Vehicle: After successfully doing Step 6 - Ignition “OFF” by using Start Button. - Please wait in the vehicle for 5 sec without opening GPA(Glass Panel Assy) & ROLL BLIND ASM after “OFF” the Ignition. -After 5 sec get out of the Vehicle by opening the door. OFF Open BODY 31
RkJQdWJsaXNoZXIy MTIwNTUz