NEXON 2.0 EV DTC Troubleshooting Document for VCU Version: 1.0 draft Date: 31-Jan-2022 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. P3003 -12: - Accelerator Pedal Sensor 1 - circuit short to battery Overview: ISO Code P3003-12 Customer Symptom Vehicle is operable with reduced power. Fault Effects (On Vehicle) The vehicle is drivable with reduced power in drive mode even after accelerator pedal is completely pressed by driver. Vehicle speed will be limited to 50 kmph Lamp Status (If Any) EV Limp home telltale blinking Fault Detection Condition Short to Battery is detected by the vehicle controller, when the analog input of accelerator pedal sensor 1 to the VCU is greater than the upper threshold value of the sensor. Normal Operating Condition Accelerator pedal sensor input is within the operating range and vehicle response is according to the percentage of accelerator pedal pressed by the driver. Probable Trouble Area LV wiring Harness Accelerator pedal sensor connector Accelerator pedal sensor assembly on pedal Powertrain VCU connector Healing Condition If DTC trigger condition is healed, DTC is present only in memory. However, cluster indication will be ON till one drive cycle of vehicle, until DTC is cleared using tester tool. Component Details: Accelerator pedal sensor transmits the position of the accelerator pedal to the Vehicle Control Unit.
RkJQdWJsaXNoZXIy MTIwNTUz