NEXON 3.0 EV DTC Troubleshooting Document for VCU Version: 2.0 Date: 22-Sep-2023 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting: - 1. Remove the LV battery connections. For circuit short to battery: Step No. Description Check point If Yes If No 1 Remove the LV connector of 3 in 1 Combo Check if there is continuity between 3 in 1 Combo connector’s input pin 14, 15 and Pin 1 Problem is in the 3 in 1 Combo. Action: Replace the 3 in 1 Combo and Go to step 1. Go to Step 2 2 Remove the 3 in 1 Combo –PDU side LV connector Check if there is continuity between 3 in 1 Combo LV connector Pin C813-14, C813-15 and C813-1 Problem is in the wiring or the connector Action: Replace the LV connector/wiring and Go to step 2. Go to Step 3 3 Remove VCU side and 3 in 1 Combo –PDU side LV connectors Check if there is continuity between these connectors (C813 Pin-15 and C776A Pin 17) And (C813 Pin-14 and C776A Pin 64) No problem in the wiring between the 3 in 1 Combo –PDU connector and VCU connector. Problem is in the wiring or the connector Action: Replace the LV connector/wiring and go to step 4 4 If there are any inline connectors, remove each of them Check if there is continuity between consecutive connectors No problem in wiring between the inline connectors Go to Step 5
RkJQdWJsaXNoZXIy MTIwNTUz