NEXON 3.0 EV DTC Troubleshooting Document for VCU Version: 2.0 Date: 22-Sep-2023 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Action: change LV wiring harness connector and repeat step 4 5 Remove the VCU connector. Check if there is a continuity between LSD pin A85 of VCU and the chassis Problem in VCU connector or VCU. (Change VCU connector or VCU) TBD Action: Go to step 5 DTC’s confirmation: - After rectification, send Clear the DTC command by using TML diagnostic tool. Ensure no DTC is in defect/ confirmed state before handing over to customer. Circuit Schematic Diagram: Component Location & Image: -
RkJQdWJsaXNoZXIy MTIwNTUz