NEXON 3.0 EV DTC Troubleshooting Document for VCU Version: 2.0 Date: 22-Sep-2023 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. P3068 - 04: - CCS DC Fast Charging – Positive or Negative (one) contactor welded - System Internal Failures Overview: ISO Code P3068-04 Customer Symptom Vehicle is operable. Charging will take place. Fault Effects (On Vehicle) NA Lamp Status (If Any) Service Lamp indication is Blinking on cluster Fault Detection Condition When DC Fast charging contactor weld is detected Normal Operating Condition During normal operating condition during DC fast charging VCU enables these contactors. So that supply from outside charging station get connected with HV battery. Probable Trouble Area 3 IN 1 COMBO-PDU HV connector Inside 3 IN 1 COMBO-PDU Healing Condition NA Component Details: DC fast charging has 2 contactors inside 3 IN 1 COMBO-PDU on both positive and negative busbars. When fast charging gun is connected to inlet VCU will enable these contactors based on vehicle charge and health condition. Preliminary Checks: Check for loose connection of LV wiring harness between VCU and 3 IN 1 COMBOPDU LV connector Check for damage to LV wiring harness connections between VCU and 3 IN 1 COMBO-PDU LV connector Check for CCS2 charging cable which connects to 3 IN 1 COMBO-PDU. Visually inspect 3 IN 1 COMBO-PDU for damage
RkJQdWJsaXNoZXIy MTIwNTUz