`249 Author: Navya Krishnan Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Kanger 3.0 DTC Troubleshooting Data Version: 1.0 Date: 24-July-2023 U192618:- DCDC Functional Safety Failure Overview: ISO Code (If applicable) P19B996 Customer Symptom NA Fault Effect (On Vehicle) DCDC Converter is not charging LV battery. Vehicle stops when LV battery is completely drained Lamp Status (If Any) NA DTC Detection Condition This DTC gets logged if One of DCDC internal fault happens/ Functional safety fault happen Normal Operating Condition No functional safety fault Probable Trouble Area DCDC input Voltage high DCDC input Voltage Low DCDC Output Current High DCDC Output Current Low DCDC internal issue Healing Condition Ignition OFF wait till VCU sleeps & Ignition ON Write up for the related system:- The component 3in1( DC-DC Converter, On-Board Charger and Power distribution unit)is used to charge LV battery, HV battery and act as junction box between HV power train components ( PTC, e-Compressor, HV battery, Fast Charging and MCU) Pre-Check Points:-
RkJQdWJsaXNoZXIy MTIwNTUz