`250 Author: Navya Krishnan Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Kanger 3.0 DTC Troubleshooting Data Version: 1.0 Date: 24-July-2023 Trouble Shooting:- Flow Diagram or table format for diagnosing the fault code Step no. Description Check Point if YES if NO 1 Remove the 12V LV battery negative terminal. After a minute connect the 12V LV battery negative terminal & "Ignition Switch" to ON position. Crank and wait for 2 minutes. Clear fault code and check again. Fault code is present? Go to step 2 Repair complete. 2 Check for any other fault code in DCDC related to input/output. Fault any other code is also present? Trouble shoot the DTC Record local snapshot of DTC. Replace DCDC Converter DTC’s confirmation:- After rectification, ensure the following points by referring DCDC parameters using TML diagnostic tool before handing over to customer. c) DCDC converter charging LV battery in the range of 8V to 16V d) OBC charges HV battery
RkJQdWJsaXNoZXIy MTIwNTUz