NEXON NEW MCE-2 DCT BS VI DTC Troubleshooting Guide Version: 1.0 Date: 16-06-2023 Author: Akash/Rahul Page:16 of 645 Copyright ©TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. After rectification, clear all DTC’s and ensure the following points by referring TCU parameters using TML diagnostic tool before handing over to customer. • After key and engine ON with TML TCU diagnostic tool connected, monitor the brake press status and confirm that it changes from about 0 unpressed to 1 when pressed fully. • Drive the vehicle through all gears in both Automatic and Manual modes. • Ensure no DTC is active and Transmission Fault Lamp is OFF. Circuit Schematic Diagram: Connector Location: - Pin numbering scheme of the TCU connectors
RkJQdWJsaXNoZXIy MTIwNTUz