NEXON NEW MCE-2 DCT BS VI DTC Troubleshooting Guide Version: 1.0 Date: 16-06-2023 Author: Akash/Rahul Page:281 of 645 Copyright ©TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Component Location & Image:- Connector Location: - Connector View & Information: - Inspection Method: - 81. P1715-85 Speed Sensor 3 (input shaft): Signal out of range Overview: ISO Code P1715-85 Customer Symptom • Transmission fault lamp ON • Mileage based reaction after 100 km warning message Fault Effects (On Vehicle) • Transmission fault lamp ON • Mileage based reaction after 100 km warning message Lamp Status (If Any) Transmission fault lamp ON Service indication 0x2 Fault Detection Condition speed signal out of range (FFT=1000ms) Normal Operating Condition TCU does not detect any error Probable Trouble Area 1. Transmission wiring loom (Input shaft sensor). 2. Input shaft sensor. 3. TCU. Healing Condition The reaction is cleared at SW restart and driving if the detection is FALSE for more than 2000 ms
RkJQdWJsaXNoZXIy MTIwNTUz