NEXON NEW MCE-2 DCT BS VI DTC Troubleshooting Guide Version: 1.0 Date: 16-06-2023 Author: Akash/Rahul Page:602 of 645 Copyright ©TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Circuit schematics:- 185. U0103-82 CAN communication with GSM failed – Sequence counter failed Over view : ISO Code U0103-82 Customer Symptom • Critical malfunction • Powertrain is opened • Power loss triggered when standing still Fault Effects (On Vehicle) • D,R,N,P shift will not happen due no communication between TCU and GSM • Transmission Fault Lamp ON Lamp Status (If Any) Transmission Fault Lamp ON (Service indication 0x1) Fault Detection Condition CAN communication failure (CRC) with the EMS node (on the receiving side, i.e. TCU = receiver) for > 1000ms Normal Operating Condition All gear shift will be possible Probable Trouble Area 1.Monostable shifter CAN H and CAN L pin 2.Wiring connection between CAN H to CAN L pin of Shifter and TCU Healing Condition The reaction is cleared at SW restart if the detection is FALSE for more than 1000 ms Preliminary checks: 3. Check for wiring lose connection between TCU and Shifter
RkJQdWJsaXNoZXIy MTIwNTUz