Nexon MCE 2 Gen2 Digital Instrument Cluster DTC Troubleshooting Data Version: 1.0 Date: 11-June-23 Author: Vasant Date Page: 81 of 141 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Component Location & Image:- N/A Connector View & Information: - Wireless charger input (Pin no.19) Inspection Method: - N/A B194F - 11:- Wireless charger Input – Circuit Short to ground Overview:- ISO Code B194F - 11 Customer Symptom Wireless charger information will not displayed in HU Fault Effects (On Vehicle) N/A Lamp Status (If Any) N/A Fault Detection Condition Wireless charger information will not displayed in HU Normal Operating Condition Wireless charger information will displayed in HU Probable Trouble Area Related wiring Harness, connector or terminals damaged IPC connector wired wrong, Harness wire shorted, Wireless charger damaged. Healing Condition IC shall recover from short condition after receiving valid input in IGN ON. Component Details:- Wireless charger will give PWM input to Instrument cluster and instrument cluster will convert PWM to CAN and transmit to HU. Preliminary Checks:- Check Battery Voltage is normal in the range (9v - 16v)
RkJQdWJsaXNoZXIy MTIwNTUz